ope体育

Mine crushing pulse bag filter installation completed-Botou Kangyue Environmental Protection

Mobile Station | Company News | Site Map
Service Hotline:
15030796891
Hot Tags: Bag Dust Collector | Stand-alone Dust Collector | Pulse Dust Collector | Cyclone Dust Collector | Dust Bag | Dust Removal Framework | Electromagnetic Pulse Valve |

Installation of mine crushing pulse bag filter completed

泊头市康越环保 发布时间: 2019/8/15 8:31:37 Source : Kangyue Environmental Protection , Botou City Release time: 2019/8/15 8:31:37
The installation and commissioning of the Kangyuehuan mine crusher dust collector is completed. The company's staff customized a bag duster according to the site's mechanical cutting, grinding and crushing sieve conditions. The pulse bag duster is a type of large air volume, good dust removal effect, Large dust removal equipment with high dust removal efficiency, reliable operation, convenient maintenance and small footprint.
The pollution sources of the mine mainly come from the dust generated during the crushing processing, dry sieving, dry separation and ore transportation of the ore by the ore processing plant; the odor of the flotation agent in the flotation workshop; sulfur dioxide, arsenic trioxide, soot in the roasting workshop; pulse cloth bags The dust collector is a small-scale dust removal equipment commonly used in the dust removal industry. The single machine has six specifications of 24, 32, 48, 112, 80, 112, and 120 and is divided into two installation forms, which can meet different installations. The DMC stand-alone pulse bag dust collector produced by Kangyue Environmental Protection has good spraying effect, simple structure, convenient installation, and high ash cleaning efficiency. It is used in metallurgy, casting, chemical, building materials, food, machinery, light industry, rubber and other industries with dust-containing gas Purification ventilation dust removal equipment.
<strong> Pulse bag dust collector </ strong> Pulse single machine dust collector Mine dust collector
Working principle of mine pulse bag filter :
Dust-containing air enters the dust collection chamber from the air inlet at the bottom of the lower box. Dust particles are blocked on the outer wall of the filter bag, and the air purified through the filter bag is discharged from the fan outlet. With the increase of dust particles on the surface of the filter bag, the resistance of the dust collector also increases accordingly, gradually weakening the filtering capacity. When the resistance reaches _ degree, it needs to be cleaned. At this time, the pulse controller periodically sends signals and sequentially opens the electromagnetic pulse valve, so that the compressed air in the air bag passes through the small hole in the blow pipe through the pulse valve, and ejects a high-speed and high-pressure induced airflow into the filter bag. Rapid expansion, followed by blowing the middle finger, the filter bag contracted sharply again, so the expansion and contraction caused the dust accumulated on the outer wall of the filter bag to shake off, and the filter bag was in good working condition. Because the ash cleaning process is performed sequentially and the dust-containing air is not cut off at all, its dust removal capacity remains basically unchanged during the work of the dust collector. In order to meet the requirements of different working conditions, the pulse interval and pulse width of the pulse controller can be adjusted arbitrarily.
Technical parameter table of pulse bag filter ;

model

DMC-22

DMC-34

DMC-44

DMC-56

DMC-22L

DMC-34L

DMC-44L

DMC-56L

Air volume m3 / h

588-1176

900-1800

1200-2400

1500-3000

900-1800

1380-2760

1800-3600

2280-4560

Filtration area

9.8

15

20

25

15

twenty three

30

38

Filtering wind speed

1-2m / min

Equipment resistance

1200Pa

Dust concentration

< 20g / m3

Dust removal efficiency

99.50%

Filter bag specifications

Φ110 × 1300mm

Φ110 × 2000mm

Number of filter bags

twenty two

34

44

56

twenty two

34

44

56

Solenoid valve specifications

3/4 "

Number of solenoid valves

4

6

6

8

4

6

6

8

Compressed air pressure

400-700KPa

Compressed air consumption m3 / min

0.3

0.5

0.5

0.6

0.3

0.5

0.5

0.6

Overall dimensions mm

Φ980 × 1600

Φ1150 × 1600

Φ1420 × 1700

Φ1500 × 1700

Φ980 × 2300

Φ1150 × 2300

Φ1420 × 2400

Φ1560 × 2400

Mass kg

284

378

516

563

358

516

698

795

Home | Products | Industrial Dust Collector | Technical Information | Company Album | Information Center | After- sales Service | Company Profile | Company Qualification | Contact Information | Google Map
Company Name: Botou Kangyue Environmental Protection Co., Ltd. Address: Huangtun, Siying Township, Botou City: 062151 Tel: 0317-8346823 8295600 Fax: 0317-8285600
Mobile phone: 15030796891 13831773535 Website: http://cms007.com Email: btkscc@126.com
Botou Kangyue Environmental Protection 2011 (C) All rights reserved and reserves the right to interpret all contents of the website. ICP No. 15008741-1
PowerBy: Speed Bay · Soubao Website Construction: Sifang