LDM off-line (online) ash cleaning pulse dust collector
, dust collector, dust collector skeleton, off-line ash cleaning solves the problem of "dust reattachment and runaway" existing in conventional LDM off-line ash cleaning pulse bag filter, which greatly improves Filter bag ash cleaning effect, so as to increase the filtration speed, save ash cleaning energy consumption and extend the filter bag life, is our unique proprietary technology products.
This dust collector is especially suitable for air purification with light weight, fine grain and sticky dust. Divided into three series: large, medium and small.
This dust collector uses high-pressure (0.5-0.7Mpa) blow-flow pulse valve to blow out the dust from the filter bag by bag. It can remove more than 99.9% of the gas from a large amount of fine powder (particles ≤5μm, content ≥70%). The dust is collected and the emission concentration is lower than 60mg / Nm3. It is widely used in the dust management of the cement industry. The body of the dust collector adopts an all-steel structure design, and the foreign guest adopts double-layer thermal insulation of LBY type light rock wool board. The cold-pressed molding flower plate not only increases the strength but also the equipment quality. Choose different filter materials and filter wind speed according to the working environment.