ope体育

Kang Yue KMF-25 type right angle electromagnetic pulse valve, right angle pulse electromagnetic valve, right angle electromagnetic pulse valve-KMF-Z-25 type right angle electromagnetic pulse valve factory direct sales

Mobile Station | Company News | Site Map
Service Hotline:
15030796891
Hot Tags: Bag Dust Collector | Stand-alone Dust Collector | Pulse Dust Collector | Cyclone Dust Collector | Dust Bag | Dust Removal Framework | Electromagnetic Pulse Valve |
KMF-25型直角电磁脉冲阀-直角脉冲电磁阀-直角电磁脉冲阀

KMF-Z-25 Right Angle Solenoid Pulse Valve

The kMF type right-angle electromagnetic pulse valve (also known as a diaphragm valve) is a compressed air “switch” of the ash cleaning and blowing system of a pulse precipitator. It is controlled by the output signal of the pulse blowing controller. Ash, keeping the resistance of the dust collector within the set range, so as to _ the processing capacity and dust collection efficiency of the dust collector.
河北省>泊头市 Place of Origin: Hebei Province> Botou City
泊头市康越环保有限公司 Supplier: Botou Kangyue Environmental Protection Co., Ltd.
点击这里给我发消息
Consulting Hotline: 0317-8346823 8295600

KMF-Z-25 type right angle electromagnetic pulse valve

I. Use
The electromagnetic pulse valve (also known as the diaphragm valve) is a compressed air "switch" of the pulse bag dust removal and blowing system. Controlled by the output signal of the pulse spray controller, the filter bags are sprayed in a row (room) to clean the dust, so that the resistance of the dust collector is kept within the set range, so as to _ the processing capacity and dust collection efficiency of the dust collector.
KMF-Z-25 type electromagnetic pulse valve is a right-angle valve. The angle between the inlet and outlet is 90 °, which is suitable for the installation and connection of the air bag and the dust collector spray pipe. The air flow is smooth, and it can provide the dust cleaning gas pulse that meets the requirements.
Working principle
The diaphragm divides the electromagnetic pulse valve into two front and rear air chambers. When the compressed air is turned on, the compressed air enters the rear air chamber through the orifice. At this time, the pressure of the rear air chamber brings the diaphragm assembly close to the output port of the valve. The solenoid pulse valve is in the "closed" state.
The electric signal of the pulse spray controller moves the armature of the electromagnetic pulse valve back, the vent hole of the air chamber behind the valve opens, the back chamber quickly loses pressure, the diaphragm assembly moves backward, and compressed air is blown through the valve output port. "On" state.
The electrical signal of the pulse injection controller disappeared, the armature of the electromagnetic pulse valve was reset, the vent hole of the rear air chamber was closed, and the pressure of the rear air chamber was raised to make the diaphragm assembly close to the output port of the valve.
Third, the internal structure diagram
Solenoid pulse valve
DMF Type Right Angle Pulse Valve Parts List
Serial number name
Quantity
1 Electromagnetic coil 1
2 Wire guide assembly 1
3 Line guide plate 1
4 Pressure plate seal
1
5 Wire guide valve assembly
1
6 Small spring
1
7 General small die assembly 1
8 S valve cover
1
9 Big spring
1
10 Large diaphragm assembly 1
11 Valve seat 1
Fourth, model specification selection table
Serial number
Model specifications
Nominal diameter Number of diaphragms Inlet size
Air outlet side connection form
weight
mm
Inch
1
KMF-Z-20
20

/ 4 " 3/4 "

1

/ 4 " G 3/4 "

/ 4 " 3/4 "

0.65kg
2
KMF-Z-25
25
1"
1
G 1 "
G 1 "
0.8kg
3
KMF-Z-45S
40

1 / 2 " 1 1/2 "

2

1 / 2 " G 1 1/2 "

1 / 2 " G 1 1/2 "
1.4kg
4
KMF-Z-50S
50
2"
2
G 2 "
G 2 "
2.4kg
5
KMF-Z-62S
62

1 / 2 " 2 1/2 "

2

1 / 2 " G 2 1/2 "

1 / 2 " G 2 1/2 "

3.5kg
6
KMF-Z-76S
76
3 "
2
G 3 "
G 3 "
4.3kg
V. Technical Index of Electromagnetic Pulse Valve :
Product number
KMF-Z type right angle electromagnetic pulse valve
Working pressure 0.4 ~~ 0.6Mpa
Working medium Clean air
Voltage DC24V, AC220V, AC110V
Electric current
0.8A, 0.23A
Use environment Temperature: -25 ℃ ~~ + 55 ℃, relative humidity of air is not more than 85%
Diaphragm life 1 million shots or three years
Six, material description
Valve body Aluminum alloy
Card spring stainless steel
Wire guide assembly 430FR stainless steel and other materials
Diaphragm Imported nitrile rubber
spring 304 stainless steel
fastener 302 stainless steel
Structure size
Browse more about

contact details

Botou Kangyue Environmental Protection Co., Ltd.
Address: Fuzhen Development Zone, Botou City Tel: 0317-8295600
Fax: 0317-8285600
Mobile: 15030796891
Email: btkscc@126.com
Home | Products | Industrial Dust Collector | Technical Information | Company Album | Information Center | After- sales Service | Company Profile | Company Qualification | Contact Information | Google Map
Company Name: Botou Kangyue Environmental Protection Co., Ltd. Address: Huangtun, Siying Township, Botou City: 062151 Tel: 0317-8346823 8295600 Fax: 0317-8285600
Mobile phone: 15030796891 13831773535 Website: http://cms007.com Email: btkscc@126.com
Botou Kangyue Environmental Protection 2011 (C) All rights reserved and reserves the right to interpret all contents of the website. ICP No. 15008741-1
PowerBy: Speed Bay · Soubao Website Construction: Zhongke Sifang